Zenit ZEN-SMF200/2/2-80HT Cast Iron Industrial Drainage Pump

Zenit ZEN-SMF200/2/2-80HT Cast Iron Industrial Drainage Pump SME Drainage High efficiency pump suitable for pumping storm water, waste water in small sewer systems, livestock farms, the food industry, agriculture and irrigation. Cast iron construction with stainless steel handle and 1 x Silicon Mechanical Seal 1.5kW, 2.0hp, 240V without float switch, max head 16.8m, max flow 960L/m, Outlet DN 80mm/2” BSPF Technical Data: Max Flow: 960LT/min Max Head: 16.5m Horse Power: 2.0HP Rated power output (P2): 1.5kW Input power (P1): 2.1kW Nominal absorbed current (In): 3.7A Rated power factor(cos phi): 0.83 Nominal power frequency (f): 50 Hz Rated nominal voltage(Vn): 415 V N° phases: 3 ( 3 phase pumps require contractor and overload) IP Motor: 68 ATEX thermal class: T4 Insulation class: F Constructive Characteristics: Outlet: G2″ DN50 PN10 Outlet orientation: H (horizontal) Type of starting: D Weight: 36 kg EX cable type: NSSHOU-J 4G1.5 2X0.75 Standard paint type: Bicomponent epoxy paint Maximum acoustic pressure: 70 dB Set of standard mechanical seals: Two Silicon carbide mechanical seal (SiC)   Use Limits: Maximum operating temperature: 40 °C Maximum immersion depth: 20 m PH of treated fluid: 6 to 14 pH Max starts per hour: 30   Materials: Case: Grey Cast Iron – EN-GJL 250 (02) Shaft: Stainless Steel – AISI 420 (23) Cooling jacket: Not applicable (00) Standard gasket: Rubber – NBR (77) EX gasket Not applicable (00) Nuts and bolts: Stainless Steel – Class A2-70 (42) Hydraulic: Grey Cast Iron – EN-GJL 250 (02) Impeller: Grey Cast Iron – EN-GJL 250 (02) Cutting disk: Not applicable (00) Cutter Not applicable (00) Grid: Stainless Steel – AISI 304 (20) Test Limits: Density of treated fluid 1 Kg/dm³ Viscosity of treated fluid 1 mm²/s   1 Year Zenit Warranty