Atlas Filtri DP Duo Filter Kit Housing Big 10″ x 1.5″

Atlas Filtri DP Duo Filter Housing 10″ Big with 1.5″ Fittings   Supplied with filters: 1 x 20­­µm Pleated Polyester 10″ Jumbo Cartridge 10″ x 4.5″ [807307] 1 x 1­µm Polyspun 10″ Jumbo Cartridge 10″ x 4.5″ [807297] A Duo 10” BIG Filter housing, with 1.5” in/out plastic BSP threads, pressure gauge (manometer) ports and drain port. Chooses the Duo with 2 filter bowls on a single moulded head to save time plumbing up separate housings when you need to use two in series and reduce the number of potential leak points, Designed to accept 10”x 4.5” filter cartridges. These are most commonly used domestic, commercial and industrial applications A: 375mm B: 390mm C: 185mm Features These have time and labor saving additions built in: Pressure gauge ports – no more need to plumb pressure gauges separately Adding pressure gauges makes it easier than ever to see when filters need changed, giving you optimal life and performance of your filters Drain Ports – Making changing filters easier than ever Just open the drain port and drain the water into a bucket, no more messy water splashing on the floor, and the filter bowl is lighter and easier to manage Drain ports are easy to open with the your included reversible spanner, one side for the filter bowl, the other for the drain port These are available in: Mono – single filter housing Duo – Double Filter housing with moulded head Trio – Triple – Filter housing with moulded head All Atlas Filtri BIG Housings come with: Bracket Spanner Lubrikit (O-ring lubricant) Working Conditions Max Working Pressure 8.3bar (120 psi) Max Working Temperature 45°C (113°F) Min Working Temperature 4°C (39.2°F) Filters Included Technical Specifications Brand Atlas Filtri Product Type Pleated Filters Flow Rate (L/min) 58 Material Polypropylene/Polyester Fabric Nominal Micron Rating 20 Min Temp (degrees celsius) 4 Max Temp (degrees celsius) 45 Filter 10″ Big Brand Atlas Filtri Product Type Polyspun Filters Flow Rate (L/min) 42 Material Polypropylene Nominal Micron Rating 1 Min Temp (degrees celsius) 4 Max Temp (degrees celsius) 80 Filter 10″ Big SEDIMENT FILTERS Sediment Filters are used to remove particles from water and protect downstream taps etc from clogging Sediment cartridges are resistant to attack by bacteria and chemicals and are suitable for a wide range of applications, including domestic, commercial and industrial.   CS & TS Pleated Cartridge Range Polyspun cartridges are commonly used as the final filtration for sediment as damage does not compromise the micron rating These depth filters have a very large surface area and better dirt holding capacity than pleated filters 5 & 1 Micron versions are also often used as the final filter before a UV as drinking water standards require a minimum of 5 micron depth filtration 25 Micron version is sometimes used in place of a pleated filter for those who prefer to just change filters without the need to clean them, the higher dirt holding capacity means more time between giving the filters attention